Das wird mir angezeigt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @ba34a000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a6f3a10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940236K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22324K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c8fd4c ( 576 kB)
.bss : 0x80c96f4c - 0x80d478b4 ( 707 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25231 entries in 74 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000269] Console: colour dummy device 80x30
[ 0.000287] console [tty1] enabled
[ 0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000327] pid_max: default: 32768 minimum: 301
[ 0.000640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001590] Disabling memory control group subsystem
[ 0.001669] CPU: Testing write buffer coherency: ok
[ 0.002061] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002436] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002553] Hierarchical SRCU implementation.
[ 0.003190] smp: Bringing up secondary CPUs ...
[ 0.003877] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004626] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.005358] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.005462] smp: Brought up 1 node, 4 CPUs
[ 0.005473] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005478] CPU: All CPU(s) started in HYP mode.
[ 0.005483] CPU: Virtualization extensions available.
[ 0.006335] devtmpfs: initialized
[ 0.017019] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.017239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017257] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.017816] pinctrl core: initialized pinctrl subsystem
[ 0.018559] NET: Registered protocol family 16
[ 0.021286] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.026087] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026094] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.026300] Serial: AMBA PL011 UART driver
[ 0.027920] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.028378] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.059332] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ 0.060841] SCSI subsystem initialized
[ 0.061062] usbcore: registered new interface driver usbfs
[ 0.061113] usbcore: registered new interface driver hub
[ 0.061197] usbcore: registered new device driver usb
[ 0.070090] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:16
[ 0.071496] clocksource: Switched to clocksource arch_sys_counter
[ 0.148882] VFS: Disk quotas dquot_6.6.0
[ 0.148967] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.149154] FS-Cache: Loaded
[ 0.149350] CacheFiles: Loaded
[ 0.158155] NET: Registered protocol family 2
[ 0.158875] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.158985] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.159170] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.159299] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159343] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159571] NET: Registered protocol family 1
[ 0.160000] RPC: Registered named UNIX socket transport module.
[ 0.160006] RPC: Registered udp transport module.
[ 0.160011] RPC: Registered tcp transport module.
[ 0.160016] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.161609] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.164335] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.172244] FS-Cache: Netfs 'nfs' registered for caching
[ 0.172831] NFS: Registering the id_resolver key type
[ 0.172861] Key type id_resolver registered
[ 0.172866] Key type id_legacy registered
[ 0.172882] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.174732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.174853] io scheduler noop registered
[ 0.174860] io scheduler deadline registered (default)
[ 0.175136] io scheduler cfq registered
[ 0.175143] io scheduler mq-deadline registered
[ 0.175149] io scheduler kyber registered
[ 0.177414] BCM2708FB: allocated DMA memory fad00000
[ 0.177441] BCM2708FB: allocated DMA channel 0 @ bb813000
[ 0.227392] Console: switching to colour frame buffer device 228x61
[ 0.257648] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.257774] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.258245] vc-sm: Videocore shared memory driver
[ 0.258512] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.268165] brd: module loaded
[ 0.277072] loop: module loaded
[ 0.277086] Loading iSCSI transport class v2.0-870.
[ 0.277756] libphy: Fixed MDIO Bus: probed
[ 0.277844] usbcore: registered new interface driver lan78xx
[ 0.277899] usbcore: registered new interface driver smsc95xx
[ 0.277916] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.506051] Core Release: 2.80a
[ 0.506062] Setting default values for core params
[ 0.506095] Finished setting default values for core params
[ 0.706364] Using Buffer DMA mode
[ 0.706372] Periodic Transfer Interrupt Enhancement - disabled
[ 0.706377] Multiprocessor Interrupt Enhancement - disabled
[ 0.706383] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.706394] Dedicated Tx FIFOs mode
[ 0.706740] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[ 0.706764] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.706771] dwc_otg: Microframe scheduler enabled
[ 0.706824] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[ 0.706835] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[ 0.706848] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000
[ 0.706904] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.706935] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.706966] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.707011] Init: Port Power? op_state=1
[ 0.707016] Init: Power Port (0)
[ 0.707228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.707239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.707248] usb usb1: Product: DWC OTG Controller
[ 0.707256] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[ 0.707264] usb usb1: SerialNumber: 3f980000.usb
[ 0.707835] hub 1-0:1.0: USB hub found
[ 0.707873] hub 1-0:1.0: 1 port detected
[ 0.708392] dwc_otg: FIQ enabled
[ 0.708397] dwc_otg: NAK holdoff enabled
[ 0.708402] dwc_otg: FIQ split-transaction FSM enabled
[ 0.708412] Module dwc_common_port init
[ 0.708646] usbcore: registered new interface driver usb-storage
[ 0.708814] mousedev: PS/2 mouse device common for all mice
[ 0.708890] IR NEC protocol handler initialized
[ 0.708895] IR RC5(x/sz) protocol handler initialized
[ 0.708901] IR RC6 protocol handler initialized
[ 0.708907] IR JVC protocol handler initialized
[ 0.708912] IR Sony protocol handler initialized
[ 0.708917] IR SANYO protocol handler initialized
[ 0.708922] IR Sharp protocol handler initialized
[ 0.708927] IR MCE Keyboard/mouse protocol handler initialized
[ 0.708934] IR XMP protocol handler initialized
[ 0.709601] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.709864] bcm2835-cpufreq: min=600000 max=1400000
[ 0.710222] sdhci: Secure Digital Host Controller Interface driver
[ 0.710226] sdhci: Copyright© Pierre Ossman
[ 0.710588] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.710905] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.710994] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.712411] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.712551] hidraw: raw HID events driver © Jiri Kosina
[ 0.712705] usbcore: registered new interface driver usbhid
[ 0.712710] usbhid: USB HID core driver
[ 0.713347] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ 0.714834] [vc_sm_connected_init]: start
[ 0.724458] [vc_sm_connected_init]: end - returning 0
[ 0.724992] Initializing XFRM netlink socket
[ 0.725015] NET: Registered protocol family 17
[ 0.725107] Key type dns_resolver registered
[ 0.725640] Registering SWP/SWPB emulation handler
[ 0.726216] registered taskstats version 1
[ 0.732228] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.732310] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.734202] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.734211] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.792097] sdhost: log_buf @ bad13000 (fad13000)
[ 0.829824] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.831395] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.832953] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.835728] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.871517] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.872585] of_cfs_init
[ 0.872670] of_cfs_init: OK
[ 0.873234] Waiting for root device PARTUUID=0a6f3a10-02...
[ 0.921040] mmc1: new high speed SDIO card at address 0001
[ 0.921611] Indeed it is in host mode hprt0 = 00021501
[ 0.989324] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.992132] mmc0: new high speed SDHC card at address 0007
[ 0.992632] mmcblk0: mmc0:0007 SD16G 14.5 GiB
[ 0.994195] mmcblk0: p1 p2
[ 1.033814] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.033873] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.043242] devtmpfs: mounted
[ 1.046405] Freeing unused kernel memory: 1024K
[ 1.131562] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.131696] Indeed it is in host mode hprt0 = 00001101
[ 1.371829] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.371846] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.372552] hub 1-1:1.0: USB hub found
[ 1.372635] hub 1-1:1.0: 4 ports detected
[ 1.513489] systemd[1]: System time before build time, advancing clock.
[ 1.651380] NET: Registered protocol family 10
[ 1.652690] Segment Routing with IPv6
[ 1.663086] ip_tables: © 2000-2006 Netfilter Core Team
[ 1.687384] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.687973] systemd[1]: Detected architecture arm.
[ 1.689207] systemd[1]: Set hostname to <raspberrypi>.
[ 1.691556] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.699640] systemd[1]: Initializing machine ID from random generator.
[ 1.699832] systemd[1]: Installed transient /etc/machine-id file.
[ 1.821874] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 1.821892] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.822526] hub 1-1.1:1.0: USB hub found
[ 1.822633] hub 1-1.1:1.0: 3 ports detected
[ 2.151596] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg
[ 2.183033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.183496] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.183613] systemd[1]: Reached target Swap.
[ 2.201180] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.202113] systemd[1]: Created slice System Slice.
[ 2.283969] usb 1-1.1.2: New USB device found, idVendor=067b, idProduct=2303
[ 2.283988] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.283999] usb 1-1.1.2: Product: USB-Serial Controller D
[ 2.284007] usb 1-1.1.2: Manufacturer: Prolific Technology Inc.
[ 2.376706] i2c /dev entries driver
[ 2.381631] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 2.533326] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=fa20
[ 2.533344] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.533353] usb 1-1.3: Product: 2.4G Receiver
[ 2.533362] usb 1-1.3: Manufacturer: Compx
[ 2.538725] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1D57:FA20.0001/input/input0
[ 2.602772] hid-generic 0003:1D57:FA20.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input0
[ 2.607891] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1D57:FA20.0002/input/input1
[ 2.609132] hid-generic 0003:1D57:FA20.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input1
[ 2.613950] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:1D57:FA20.0003/input/input2
[ 2.621648] usb 1-1.1.3: new low-speed USB device number 6 using dwc_otg
[ 2.681895] hid-generic 0003:1D57:FA20.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input2
[ 2.700237] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.791792] systemd-journald[90]: Received request to flush runtime journal from PID 1
[ 2.860511] usb 1-1.1.3: New USB device found, idVendor=04d9, idProduct=1603
[ 2.860532] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.860542] usb 1-1.1.3: Product: USB Keyboard
[ 2.860550] usb 1-1.1.3: Manufacturer:
[ 2.909135] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:04D9:1603.0004/input/input3
[ 2.972450] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-3f980000.usb-1.1.3/input0
[ 3.041391] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:04D9:1603.0005/input/input4
[ 3.102832] hid-generic 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-3f980000.usb-1.1.3/input1
[ 3.272217] usbcore: registered new interface driver usbserial
[ 3.272295] usbcore: registered new interface driver usbserial_generic
[ 3.272372] usbserial: USB Serial support registered for generic
[ 3.277119] usbcore: registered new interface driver pl2303
[ 3.277214] usbserial: USB Serial support registered for pl2303
[ 3.277316] pl2303 1-1.1.2:1.0: pl2303 converter detected
[ 3.302008] usb 1-1.1.2: pl2303 converter now attached to ttyUSB0
[ 3.401595] usb 1-1.1.1: new high-speed USB device number 7 using dwc_otg
[ 3.533106] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 3.533125] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.752360] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.755293] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 3.810215] libphy: lan78xx-mdiobus: probed
[ 3.978930] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.992096] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 3.992936] usbcore: registered new interface driver brcmfmac
[ 4.241949] random: crng init done
[ 4.293727] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 4.294346] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
[ 5.185388] uart-pl011 3f201000.serial: no DMA platform data
[ 5.885456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.885616] brcmfmac: power management disabled
[ 6.158860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.650956] EXT4-fs (mmcblk0p2): resizing filesystem from 1197056 to 3786752 blocks
[ 13.101333] systemd[1]: apt-daily.timer: Adding 9h 27min 47.244173s random time.
[ 13.200276] Bluetooth: Core ver 2.22
[ 13.200327] NET: Registered protocol family 31
[ 13.200330] Bluetooth: HCI device and connection manager initialized
[ 13.200345] Bluetooth: HCI socket layer initialized
[ 13.200354] Bluetooth: L2CAP socket layer initialized
[ 13.200372] Bluetooth: SCO socket layer initialized
[ 13.587624] Bluetooth: HCI UART driver ver 2.3
[ 13.587634] Bluetooth: HCI UART protocol H4 registered
[ 13.587637] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.587759] Bluetooth: HCI UART protocol Broadcom registered
[ 15.371578] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 16.778882] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.778897] Bluetooth: BNEP filters: protocol multicast
[ 16.778923] Bluetooth: BNEP socket layer initialized
[ 16.828215] Bluetooth: RFCOMM TTY layer initialized
[ 16.828244] Bluetooth: RFCOMM socket layer initialized
[ 16.828267] Bluetooth: RFCOMM ver 1.11
[ 17.333184] EXT4-fs (mmcblk0p2): resized to 2097152 blocks
[ 27.930377] EXT4-fs (mmcblk0p2): resized filesystem to 3786752
[ 44.157250] systemd[1]: apt-daily.timer: Adding 7h 48min 14.675993s random time.
[ 48.222227] fuse init (API version 7.26)
[ 156.992838] systemd[1]: apt-daily.timer: Adding 10h 42min 50.960941s random time.
[ 157.545666] systemd[1]: apt-daily.timer: Adding 3h 21min 23.313919s random time.
[ 164.781514] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg
[ 175.148056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 176.621542] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg
aktuelle läuft es auf einem Raspberry Pi 3 b+ also den mit 5 ghz Wlan und es läuft Raspbian strecht
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @ba34a000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a6f3a10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940236K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22324K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c8fd4c ( 576 kB)
.bss : 0x80c96f4c - 0x80d478b4 ( 707 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25231 entries in 74 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000269] Console: colour dummy device 80x30
[ 0.000287] console [tty1] enabled
[ 0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000327] pid_max: default: 32768 minimum: 301
[ 0.000640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001590] Disabling memory control group subsystem
[ 0.001669] CPU: Testing write buffer coherency: ok
[ 0.002061] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002436] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002553] Hierarchical SRCU implementation.
[ 0.003190] smp: Bringing up secondary CPUs ...
[ 0.003877] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004626] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.005358] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.005462] smp: Brought up 1 node, 4 CPUs
[ 0.005473] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005478] CPU: All CPU(s) started in HYP mode.
[ 0.005483] CPU: Virtualization extensions available.
[ 0.006335] devtmpfs: initialized
[ 0.017019] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.017239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017257] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.017816] pinctrl core: initialized pinctrl subsystem
[ 0.018559] NET: Registered protocol family 16
[ 0.021286] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.026087] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026094] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.026300] Serial: AMBA PL011 UART driver
[ 0.027920] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.028378] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.059332] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ 0.060841] SCSI subsystem initialized
[ 0.061062] usbcore: registered new interface driver usbfs
[ 0.061113] usbcore: registered new interface driver hub
[ 0.061197] usbcore: registered new device driver usb
[ 0.070090] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:16
[ 0.071496] clocksource: Switched to clocksource arch_sys_counter
[ 0.148882] VFS: Disk quotas dquot_6.6.0
[ 0.148967] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.149154] FS-Cache: Loaded
[ 0.149350] CacheFiles: Loaded
[ 0.158155] NET: Registered protocol family 2
[ 0.158875] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.158985] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.159170] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.159299] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159343] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159571] NET: Registered protocol family 1
[ 0.160000] RPC: Registered named UNIX socket transport module.
[ 0.160006] RPC: Registered udp transport module.
[ 0.160011] RPC: Registered tcp transport module.
[ 0.160016] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.161609] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.164335] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.172244] FS-Cache: Netfs 'nfs' registered for caching
[ 0.172831] NFS: Registering the id_resolver key type
[ 0.172861] Key type id_resolver registered
[ 0.172866] Key type id_legacy registered
[ 0.172882] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.174732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.174853] io scheduler noop registered
[ 0.174860] io scheduler deadline registered (default)
[ 0.175136] io scheduler cfq registered
[ 0.175143] io scheduler mq-deadline registered
[ 0.175149] io scheduler kyber registered
[ 0.177414] BCM2708FB: allocated DMA memory fad00000
[ 0.177441] BCM2708FB: allocated DMA channel 0 @ bb813000
[ 0.227392] Console: switching to colour frame buffer device 228x61
[ 0.257648] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.257774] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.258245] vc-sm: Videocore shared memory driver
[ 0.258512] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.268165] brd: module loaded
[ 0.277072] loop: module loaded
[ 0.277086] Loading iSCSI transport class v2.0-870.
[ 0.277756] libphy: Fixed MDIO Bus: probed
[ 0.277844] usbcore: registered new interface driver lan78xx
[ 0.277899] usbcore: registered new interface driver smsc95xx
[ 0.277916] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.506051] Core Release: 2.80a
[ 0.506062] Setting default values for core params
[ 0.506095] Finished setting default values for core params
[ 0.706364] Using Buffer DMA mode
[ 0.706372] Periodic Transfer Interrupt Enhancement - disabled
[ 0.706377] Multiprocessor Interrupt Enhancement - disabled
[ 0.706383] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.706394] Dedicated Tx FIFOs mode
[ 0.706740] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[ 0.706764] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.706771] dwc_otg: Microframe scheduler enabled
[ 0.706824] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[ 0.706835] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[ 0.706848] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000
[ 0.706904] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.706935] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.706966] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.707011] Init: Port Power? op_state=1
[ 0.707016] Init: Power Port (0)
[ 0.707228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.707239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.707248] usb usb1: Product: DWC OTG Controller
[ 0.707256] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[ 0.707264] usb usb1: SerialNumber: 3f980000.usb
[ 0.707835] hub 1-0:1.0: USB hub found
[ 0.707873] hub 1-0:1.0: 1 port detected
[ 0.708392] dwc_otg: FIQ enabled
[ 0.708397] dwc_otg: NAK holdoff enabled
[ 0.708402] dwc_otg: FIQ split-transaction FSM enabled
[ 0.708412] Module dwc_common_port init
[ 0.708646] usbcore: registered new interface driver usb-storage
[ 0.708814] mousedev: PS/2 mouse device common for all mice
[ 0.708890] IR NEC protocol handler initialized
[ 0.708895] IR RC5(x/sz) protocol handler initialized
[ 0.708901] IR RC6 protocol handler initialized
[ 0.708907] IR JVC protocol handler initialized
[ 0.708912] IR Sony protocol handler initialized
[ 0.708917] IR SANYO protocol handler initialized
[ 0.708922] IR Sharp protocol handler initialized
[ 0.708927] IR MCE Keyboard/mouse protocol handler initialized
[ 0.708934] IR XMP protocol handler initialized
[ 0.709601] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.709864] bcm2835-cpufreq: min=600000 max=1400000
[ 0.710222] sdhci: Secure Digital Host Controller Interface driver
[ 0.710226] sdhci: Copyright© Pierre Ossman
[ 0.710588] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.710905] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.710994] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.712411] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.712551] hidraw: raw HID events driver © Jiri Kosina
[ 0.712705] usbcore: registered new interface driver usbhid
[ 0.712710] usbhid: USB HID core driver
[ 0.713347] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ 0.714834] [vc_sm_connected_init]: start
[ 0.724458] [vc_sm_connected_init]: end - returning 0
[ 0.724992] Initializing XFRM netlink socket
[ 0.725015] NET: Registered protocol family 17
[ 0.725107] Key type dns_resolver registered
[ 0.725640] Registering SWP/SWPB emulation handler
[ 0.726216] registered taskstats version 1
[ 0.732228] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.732310] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.734202] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.734211] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.792097] sdhost: log_buf @ bad13000 (fad13000)
[ 0.829824] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.831395] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.832953] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.835728] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.871517] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.872585] of_cfs_init
[ 0.872670] of_cfs_init: OK
[ 0.873234] Waiting for root device PARTUUID=0a6f3a10-02...
[ 0.921040] mmc1: new high speed SDIO card at address 0001
[ 0.921611] Indeed it is in host mode hprt0 = 00021501
[ 0.989324] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.992132] mmc0: new high speed SDHC card at address 0007
[ 0.992632] mmcblk0: mmc0:0007 SD16G 14.5 GiB
[ 0.994195] mmcblk0: p1 p2
[ 1.033814] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.033873] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.043242] devtmpfs: mounted
[ 1.046405] Freeing unused kernel memory: 1024K
[ 1.131562] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.131696] Indeed it is in host mode hprt0 = 00001101
[ 1.371829] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.371846] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.372552] hub 1-1:1.0: USB hub found
[ 1.372635] hub 1-1:1.0: 4 ports detected
[ 1.513489] systemd[1]: System time before build time, advancing clock.
[ 1.651380] NET: Registered protocol family 10
[ 1.652690] Segment Routing with IPv6
[ 1.663086] ip_tables: © 2000-2006 Netfilter Core Team
[ 1.687384] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.687973] systemd[1]: Detected architecture arm.
[ 1.689207] systemd[1]: Set hostname to <raspberrypi>.
[ 1.691556] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.699640] systemd[1]: Initializing machine ID from random generator.
[ 1.699832] systemd[1]: Installed transient /etc/machine-id file.
[ 1.821874] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 1.821892] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.822526] hub 1-1.1:1.0: USB hub found
[ 1.822633] hub 1-1.1:1.0: 3 ports detected
[ 2.151596] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg
[ 2.183033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.183496] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.183613] systemd[1]: Reached target Swap.
[ 2.201180] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.202113] systemd[1]: Created slice System Slice.
[ 2.283969] usb 1-1.1.2: New USB device found, idVendor=067b, idProduct=2303
[ 2.283988] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.283999] usb 1-1.1.2: Product: USB-Serial Controller D
[ 2.284007] usb 1-1.1.2: Manufacturer: Prolific Technology Inc.
[ 2.376706] i2c /dev entries driver
[ 2.381631] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 2.533326] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=fa20
[ 2.533344] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.533353] usb 1-1.3: Product: 2.4G Receiver
[ 2.533362] usb 1-1.3: Manufacturer: Compx
[ 2.538725] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1D57:FA20.0001/input/input0
[ 2.602772] hid-generic 0003:1D57:FA20.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input0
[ 2.607891] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1D57:FA20.0002/input/input1
[ 2.609132] hid-generic 0003:1D57:FA20.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input1
[ 2.613950] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:1D57:FA20.0003/input/input2
[ 2.621648] usb 1-1.1.3: new low-speed USB device number 6 using dwc_otg
[ 2.681895] hid-generic 0003:1D57:FA20.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input2
[ 2.700237] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.791792] systemd-journald[90]: Received request to flush runtime journal from PID 1
[ 2.860511] usb 1-1.1.3: New USB device found, idVendor=04d9, idProduct=1603
[ 2.860532] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.860542] usb 1-1.1.3: Product: USB Keyboard
[ 2.860550] usb 1-1.1.3: Manufacturer:
[ 2.909135] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:04D9:1603.0004/input/input3
[ 2.972450] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-3f980000.usb-1.1.3/input0
[ 3.041391] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:04D9:1603.0005/input/input4
[ 3.102832] hid-generic 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-3f980000.usb-1.1.3/input1
[ 3.272217] usbcore: registered new interface driver usbserial
[ 3.272295] usbcore: registered new interface driver usbserial_generic
[ 3.272372] usbserial: USB Serial support registered for generic
[ 3.277119] usbcore: registered new interface driver pl2303
[ 3.277214] usbserial: USB Serial support registered for pl2303
[ 3.277316] pl2303 1-1.1.2:1.0: pl2303 converter detected
[ 3.302008] usb 1-1.1.2: pl2303 converter now attached to ttyUSB0
[ 3.401595] usb 1-1.1.1: new high-speed USB device number 7 using dwc_otg
[ 3.533106] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 3.533125] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.752360] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.755293] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 3.810215] libphy: lan78xx-mdiobus: probed
[ 3.978930] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.992096] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 3.992936] usbcore: registered new interface driver brcmfmac
[ 4.241949] random: crng init done
[ 4.293727] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 4.294346] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
[ 5.185388] uart-pl011 3f201000.serial: no DMA platform data
[ 5.885456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.885616] brcmfmac: power management disabled
[ 6.158860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.650956] EXT4-fs (mmcblk0p2): resizing filesystem from 1197056 to 3786752 blocks
[ 13.101333] systemd[1]: apt-daily.timer: Adding 9h 27min 47.244173s random time.
[ 13.200276] Bluetooth: Core ver 2.22
[ 13.200327] NET: Registered protocol family 31
[ 13.200330] Bluetooth: HCI device and connection manager initialized
[ 13.200345] Bluetooth: HCI socket layer initialized
[ 13.200354] Bluetooth: L2CAP socket layer initialized
[ 13.200372] Bluetooth: SCO socket layer initialized
[ 13.587624] Bluetooth: HCI UART driver ver 2.3
[ 13.587634] Bluetooth: HCI UART protocol H4 registered
[ 13.587637] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.587759] Bluetooth: HCI UART protocol Broadcom registered
[ 15.371578] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 16.778882] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.778897] Bluetooth: BNEP filters: protocol multicast
[ 16.778923] Bluetooth: BNEP socket layer initialized
[ 16.828215] Bluetooth: RFCOMM TTY layer initialized
[ 16.828244] Bluetooth: RFCOMM socket layer initialized
[ 16.828267] Bluetooth: RFCOMM ver 1.11
[ 17.333184] EXT4-fs (mmcblk0p2): resized to 2097152 blocks
[ 27.930377] EXT4-fs (mmcblk0p2): resized filesystem to 3786752
[ 44.157250] systemd[1]: apt-daily.timer: Adding 7h 48min 14.675993s random time.
[ 48.222227] fuse init (API version 7.26)
[ 156.992838] systemd[1]: apt-daily.timer: Adding 10h 42min 50.960941s random time.
[ 157.545666] systemd[1]: apt-daily.timer: Adding 3h 21min 23.313919s random time.
[ 164.781514] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg
[ 175.148056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 176.621542] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg
aktuelle läuft es auf einem Raspberry Pi 3 b+ also den mit 5 ghz Wlan und es läuft Raspbian strecht
