Kein GPS Empfang?

[noxxpg]

Antenne hat freie sicht. Wird laut ausgabe auf USB0 verwendet. Handelt sich jedoch um ein Pl2303 Gerät.
Gibt es erfahrungen hierzu?

Ist ein Navilock NL-208P mit Kabel von Seriellen auf USB Anschluss
Das Gerät zeigt durch eine LED auch an sobald ein GPS Fix vorhanden ist.

Mal ein Auszug. Hab den Pi OHNE GPS gestartet dann die ausgabe gestartet und den GPS dann angeschlossen.
Das Fett markierte ist das was nach dem anschließen kommt.

Oct 29 17:21:14 CarPi gpsd[2434]: gpsd:ERROR: /dev/ttyUSB0: device activation failed.
Oct 29 17:21:14 CarPi kernel: [   28.844973] bcm2708_i2c_init_pinmode(1,2)
Oct 29 17:21:14 CarPi kernel: [   28.844998] bcm2708_i2c_init_pinmode(1,3)
Oct 29 17:21:14 CarPi kernel: [   28.854694] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
Oct 29 17:21:14 CarPi kernel: [   28.919446] i2c /dev entries driver
Oct 29 17:21:14 CarPi kernel: [   28.964552] pcm512x: probe of 1-004d failed with error -5
Oct 29 17:21:14 CarPi kernel: [   28.965091] pcm512x: probe of 1-004c failed with error -5
Oct 29 17:21:15 CarPi gpsd[2434]: gpsd:ERROR: device open failed: No such file or directory - retrying read-only
Oct 29 17:21:15 CarPi gpsd[2434]: gpsd:ERROR: read-only device open failed: No such file or directory
Oct 29 17:21:15 CarPi gpsd[2434]: gpsd:ERROR: /dev/ttyUSB0: device activation failed.
Oct 29 17:21:29 CarPi kernel: [   44.444850] usb 1-1.5: new full-speed USB device number 6 using dwc_otg
Oct 29 17:21:30 CarPi kernel: [   44.547019] usb 1-1.5: New USB device found, id Vendor=067b, idProduct=2303
Oct 29 17:21:30 CarPi kernel: [   44.547045] usb 1-1.5: New USB device strings:Mfr=1, Product=2, SerialNumber=0
Oct 29 17:21:30 CarPi kernel: [   44.547057] usb 1-1.5: Product: USB-Serial Controller
Oct 29 17:21:30 CarPi kernel: [   44.547068] usb 1-1.5: Manufacturer: Prolific Technology Inc.
Oct 29 17:21:30 CarPi kernel: [   44.587542] usbcore: registered new interface driver usbserial
Oct 29 17:21:30 CarPi kernel: [   44.589088] usbcore: registered new interface driver usbserial_generic
Oct 29 17:21:30 CarPi kernel: [   44.589992] usbserial: USB Serial support registered for generic
Oct 29 17:21:30 CarPi kernel: [   44.595318] usbcore: registered new interface driver pl2303
Oct 29 17:21:30 CarPi kernel: [   44.595831] usbserial: USB Serial support registered for pl2303
Oct 29 17:21:30 CarPi kernel: [   44.596572] pl2303 1-1.5:1.0: pl2303 converterdetected
Oct 29 17:21:30 CarPi kernel: [   44.601208] usb 1-1.5: pl2303 converter now attached to ttyUSB0
Oct 29 17:21:30 CarPi gpsd[2607]: gpsd:ERROR: can't bind to IPv4 port gpsd, Address already in use
Oct 29 17:21:30 CarPi gpsd[2607]: gpsd:ERROR: maybe gpsd is already running!
Oct 29 17:21:30 CarPi gpsd[2607]: gpsd:ERROR: can't create IPv6 socket

Und diesen Ausdruck bekomme ich wenn das GPS direkt vom Start an dran hängt:

Oct 29 17:25:20 CarPi kernel: [    5.843367] EXT4-fs (mmcblk0p2): re-mounted. Op                    ts: (null)

Oct 29 17:25:20 CarPi kernel: [   11.318770] smsc95xx 1-1.1:1.0 eth0: hardware i                    sn't capable of remote wakeup
Oct 29 17:25:20 CarPi kernel: [   17.877950] Adding 102396k swap on /var/swap.                      Priority:-1 extents:2 across:2162644k SSFS
Oct 29 17:25:42 CarPi gpsd[2452]: gpsd:ERROR: can't create IPv6 socket
Oct 29 17:25:43 CarPi kernel: [   28.160054] bcm2708_i2c_init_pinmode(1,2)
Oct 29 17:25:43 CarPi kernel: [   28.160080] bcm2708_i2c_init_pinmode(1,3)
Oct 29 17:25:43 CarPi kernel: [   28.160604] bcm2708_i2c bcm2708_i2c.1: BSC1 Con                    troller at 0x3f804000 (irq 79) (baudrate 100000)
Oct 29 17:25:43 CarPi kernel: [   28.212290] pcm512x: probe of 1-004d failed wit                    h error -5
Oct 29 17:25:43 CarPi kernel: [   28.214274] pcm512x: probe of 1-004c failed wit                    h error -5
Oct 29 17:25:43 CarPi kernel: [   28.255536] i2c /dev entries driver