Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Probleme mit dem Global Sat bu 353s4
#1
Hallo

ich habe mir den GlobalSat BU 353s4 gekauft und bekomme ihn nicht zu laufen.

Unter lsusb wird er angezeigt.

Jedoch wird er nicht unter gpsmon richtig erkannt.

Hat einer Erfahrungen damit, oder villeicht an Workaround.
Zitieren
#2
GPSD lauscht aber schon auf dem richtigen Port? Was spuckt den DMESG aus?
Zitieren
#3
Das wird mir angezeigt

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @ba34a000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0a6f3a10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940236K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22324K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c8fd4c ( 576 kB)
.bss : 0x80c96f4c - 0x80d478b4 ( 707 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25231 entries in 74 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000269] Console: colour dummy device 80x30
[ 0.000287] console [tty1] enabled
[ 0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000327] pid_max: default: 32768 minimum: 301
[ 0.000640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001590] Disabling memory control group subsystem
[ 0.001669] CPU: Testing write buffer coherency: ok
[ 0.002061] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002436] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002553] Hierarchical SRCU implementation.
[ 0.003190] smp: Bringing up secondary CPUs ...
[ 0.003877] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004626] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.005358] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.005462] smp: Brought up 1 node, 4 CPUs
[ 0.005473] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005478] CPU: All CPU(s) started in HYP mode.
[ 0.005483] CPU: Virtualization extensions available.
[ 0.006335] devtmpfs: initialized
[ 0.017019] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.017239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017257] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.017816] pinctrl core: initialized pinctrl subsystem
[ 0.018559] NET: Registered protocol family 16
[ 0.021286] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.026087] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026094] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.026300] Serial: AMBA PL011 UART driver
[ 0.027920] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.028378] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.059332] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ 0.060841] SCSI subsystem initialized
[ 0.061062] usbcore: registered new interface driver usbfs
[ 0.061113] usbcore: registered new interface driver hub
[ 0.061197] usbcore: registered new device driver usb
[ 0.070090] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:16
[ 0.071496] clocksource: Switched to clocksource arch_sys_counter
[ 0.148882] VFS: Disk quotas dquot_6.6.0
[ 0.148967] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.149154] FS-Cache: Loaded
[ 0.149350] CacheFiles: Loaded
[ 0.158155] NET: Registered protocol family 2
[ 0.158875] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.158985] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.159170] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.159299] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159343] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159571] NET: Registered protocol family 1
[ 0.160000] RPC: Registered named UNIX socket transport module.
[ 0.160006] RPC: Registered udp transport module.
[ 0.160011] RPC: Registered tcp transport module.
[ 0.160016] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.161609] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.164335] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.172244] FS-Cache: Netfs 'nfs' registered for caching
[ 0.172831] NFS: Registering the id_resolver key type
[ 0.172861] Key type id_resolver registered
[ 0.172866] Key type id_legacy registered
[ 0.172882] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.174732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.174853] io scheduler noop registered
[ 0.174860] io scheduler deadline registered (default)
[ 0.175136] io scheduler cfq registered
[ 0.175143] io scheduler mq-deadline registered
[ 0.175149] io scheduler kyber registered
[ 0.177414] BCM2708FB: allocated DMA memory fad00000
[ 0.177441] BCM2708FB: allocated DMA channel 0 @ bb813000
[ 0.227392] Console: switching to colour frame buffer device 228x61
[ 0.257648] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.257774] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.258245] vc-sm: Videocore shared memory driver
[ 0.258512] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.268165] brd: module loaded
[ 0.277072] loop: module loaded
[ 0.277086] Loading iSCSI transport class v2.0-870.
[ 0.277756] libphy: Fixed MDIO Bus: probed
[ 0.277844] usbcore: registered new interface driver lan78xx
[ 0.277899] usbcore: registered new interface driver smsc95xx
[ 0.277916] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.506051] Core Release: 2.80a
[ 0.506062] Setting default values for core params
[ 0.506095] Finished setting default values for core params
[ 0.706364] Using Buffer DMA mode
[ 0.706372] Periodic Transfer Interrupt Enhancement - disabled
[ 0.706377] Multiprocessor Interrupt Enhancement - disabled
[ 0.706383] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.706394] Dedicated Tx FIFOs mode
[ 0.706740] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[ 0.706764] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.706771] dwc_otg: Microframe scheduler enabled
[ 0.706824] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[ 0.706835] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[ 0.706848] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000
[ 0.706904] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.706935] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.706966] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.707011] Init: Port Power? op_state=1
[ 0.707016] Init: Power Port (0)
[ 0.707228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.707239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.707248] usb usb1: Product: DWC OTG Controller
[ 0.707256] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[ 0.707264] usb usb1: SerialNumber: 3f980000.usb
[ 0.707835] hub 1-0:1.0: USB hub found
[ 0.707873] hub 1-0:1.0: 1 port detected
[ 0.708392] dwc_otg: FIQ enabled
[ 0.708397] dwc_otg: NAK holdoff enabled
[ 0.708402] dwc_otg: FIQ split-transaction FSM enabled
[ 0.708412] Module dwc_common_port init
[ 0.708646] usbcore: registered new interface driver usb-storage
[ 0.708814] mousedev: PS/2 mouse device common for all mice
[ 0.708890] IR NEC protocol handler initialized
[ 0.708895] IR RC5(x/sz) protocol handler initialized
[ 0.708901] IR RC6 protocol handler initialized
[ 0.708907] IR JVC protocol handler initialized
[ 0.708912] IR Sony protocol handler initialized
[ 0.708917] IR SANYO protocol handler initialized
[ 0.708922] IR Sharp protocol handler initialized
[ 0.708927] IR MCE Keyboard/mouse protocol handler initialized
[ 0.708934] IR XMP protocol handler initialized
[ 0.709601] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.709864] bcm2835-cpufreq: min=600000 max=1400000
[ 0.710222] sdhci: Secure Digital Host Controller Interface driver
[ 0.710226] sdhci: Copyright© Pierre Ossman
[ 0.710588] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.710905] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.710994] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.712411] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.712551] hidraw: raw HID events driver © Jiri Kosina
[ 0.712705] usbcore: registered new interface driver usbhid
[ 0.712710] usbhid: USB HID core driver
[ 0.713347] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ 0.714834] [vc_sm_connected_init]: start
[ 0.724458] [vc_sm_connected_init]: end - returning 0
[ 0.724992] Initializing XFRM netlink socket
[ 0.725015] NET: Registered protocol family 17
[ 0.725107] Key type dns_resolver registered
[ 0.725640] Registering SWP/SWPB emulation handler
[ 0.726216] registered taskstats version 1
[ 0.732228] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.732310] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.734202] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.734211] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.792097] sdhost: log_buf @ bad13000 (fad13000)
[ 0.829824] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.831395] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.832953] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.835728] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.871517] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.872585] of_cfs_init
[ 0.872670] of_cfs_init: OK
[ 0.873234] Waiting for root device PARTUUID=0a6f3a10-02...
[ 0.921040] mmc1: new high speed SDIO card at address 0001
[ 0.921611] Indeed it is in host mode hprt0 = 00021501
[ 0.989324] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.992132] mmc0: new high speed SDHC card at address 0007
[ 0.992632] mmcblk0: mmc0:0007 SD16G 14.5 GiB
[ 0.994195] mmcblk0: p1 p2
[ 1.033814] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.033873] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.043242] devtmpfs: mounted
[ 1.046405] Freeing unused kernel memory: 1024K
[ 1.131562] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.131696] Indeed it is in host mode hprt0 = 00001101
[ 1.371829] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.371846] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.372552] hub 1-1:1.0: USB hub found
[ 1.372635] hub 1-1:1.0: 4 ports detected
[ 1.513489] systemd[1]: System time before build time, advancing clock.
[ 1.651380] NET: Registered protocol family 10
[ 1.652690] Segment Routing with IPv6
[ 1.663086] ip_tables: © 2000-2006 Netfilter Core Team
[ 1.687384] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.687973] systemd[1]: Detected architecture arm.
[ 1.689207] systemd[1]: Set hostname to <raspberrypi>.
[ 1.691556] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.699640] systemd[1]: Initializing machine ID from random generator.
[ 1.699832] systemd[1]: Installed transient /etc/machine-id file.
[ 1.821874] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 1.821892] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.822526] hub 1-1.1:1.0: USB hub found
[ 1.822633] hub 1-1.1:1.0: 3 ports detected
[ 2.151596] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg
[ 2.183033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.183496] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.183613] systemd[1]: Reached target Swap.
[ 2.201180] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.202113] systemd[1]: Created slice System Slice.
[ 2.283969] usb 1-1.1.2: New USB device found, idVendor=067b, idProduct=2303
[ 2.283988] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.283999] usb 1-1.1.2: Product: USB-Serial Controller D
[ 2.284007] usb 1-1.1.2: Manufacturer: Prolific Technology Inc.
[ 2.376706] i2c /dev entries driver
[ 2.381631] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 2.533326] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=fa20
[ 2.533344] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.533353] usb 1-1.3: Product: 2.4G Receiver
[ 2.533362] usb 1-1.3: Manufacturer: Compx
[ 2.538725] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1D57:FA20.0001/input/input0
[ 2.602772] hid-generic 0003:1D57:FA20.0001: input,hidraw0: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input0
[ 2.607891] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1D57:FA20.0002/input/input1
[ 2.609132] hid-generic 0003:1D57:FA20.0002: input,hidraw1: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input1
[ 2.613950] input: Compx 2.4G Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:1D57:FA20.0003/input/input2
[ 2.621648] usb 1-1.1.3: new low-speed USB device number 6 using dwc_otg
[ 2.681895] hid-generic 0003:1D57:FA20.0003: input,hidraw2: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-3f980000.usb-1.3/input2
[ 2.700237] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.791792] systemd-journald[90]: Received request to flush runtime journal from PID 1
[ 2.860511] usb 1-1.1.3: New USB device found, idVendor=04d9, idProduct=1603
[ 2.860532] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.860542] usb 1-1.1.3: Product: USB Keyboard
[ 2.860550] usb 1-1.1.3: Manufacturer:
[ 2.909135] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:04D9:1603.0004/input/input3
[ 2.972450] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-3f980000.usb-1.1.3/input0
[ 3.041391] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:04D9:1603.0005/input/input4
[ 3.102832] hid-generic 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-3f980000.usb-1.1.3/input1
[ 3.272217] usbcore: registered new interface driver usbserial
[ 3.272295] usbcore: registered new interface driver usbserial_generic
[ 3.272372] usbserial: USB Serial support registered for generic
[ 3.277119] usbcore: registered new interface driver pl2303
[ 3.277214] usbserial: USB Serial support registered for pl2303
[ 3.277316] pl2303 1-1.1.2:1.0: pl2303 converter detected
[ 3.302008] usb 1-1.1.2: pl2303 converter now attached to ttyUSB0
[ 3.401595] usb 1-1.1.1: new high-speed USB device number 7 using dwc_otg
[ 3.533106] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 3.533125] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.752360] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.755293] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 3.810215] libphy: lan78xx-mdiobus: probed
[ 3.978930] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.992096] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 3.992936] usbcore: registered new interface driver brcmfmac
[ 4.241949] random: crng init done
[ 4.293727] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 4.294346] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
[ 5.185388] uart-pl011 3f201000.serial: no DMA platform data
[ 5.885456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.885616] brcmfmac: power management disabled
[ 6.158860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.650956] EXT4-fs (mmcblk0p2): resizing filesystem from 1197056 to 3786752 blocks
[ 13.101333] systemd[1]: apt-daily.timer: Adding 9h 27min 47.244173s random time.
[ 13.200276] Bluetooth: Core ver 2.22
[ 13.200327] NET: Registered protocol family 31
[ 13.200330] Bluetooth: HCI device and connection manager initialized
[ 13.200345] Bluetooth: HCI socket layer initialized
[ 13.200354] Bluetooth: L2CAP socket layer initialized
[ 13.200372] Bluetooth: SCO socket layer initialized
[ 13.587624] Bluetooth: HCI UART driver ver 2.3
[ 13.587634] Bluetooth: HCI UART protocol H4 registered
[ 13.587637] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.587759] Bluetooth: HCI UART protocol Broadcom registered
[ 15.371578] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 16.778882] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.778897] Bluetooth: BNEP filters: protocol multicast
[ 16.778923] Bluetooth: BNEP socket layer initialized
[ 16.828215] Bluetooth: RFCOMM TTY layer initialized
[ 16.828244] Bluetooth: RFCOMM socket layer initialized
[ 16.828267] Bluetooth: RFCOMM ver 1.11
[ 17.333184] EXT4-fs (mmcblk0p2): resized to 2097152 blocks
[ 27.930377] EXT4-fs (mmcblk0p2): resized filesystem to 3786752
[ 44.157250] systemd[1]: apt-daily.timer: Adding 7h 48min 14.675993s random time.
[ 48.222227] fuse init (API version 7.26)
[ 156.992838] systemd[1]: apt-daily.timer: Adding 10h 42min 50.960941s random time.
[ 157.545666] systemd[1]: apt-daily.timer: Adding 3h 21min 23.313919s random time.
[ 164.781514] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg
[ 175.148056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 176.621542] usb 1-1.1.3: reset low-speed USB device number 6 using dwc_otg

aktuelle läuft es auf einem Raspberry Pi 3 b+ also den mit 5 ghz Wlan und es läuft Raspbian strecht
Zitieren
#4
(02.09.2018, 09:38)L4l3lu schrieb: aktuelle läuft es auf einem Raspberry Pi 3 b+ also den mit 5 ghz Wlan und es läuft Raspbian strecht

Ich glaube du wärst in einem Linux-Forum besser aufgehoben. Hier geht es um den CarPi, der nun mal nicht unter Stretch und somit auch nicht auf dem RPi 3 B+ läuft. Die Chancen dass du hier jemanden findest der dir weiterhelfen kann sind also nicht sehr groß. Wie sieht denn dein Projekt, das du realisieren möchtest, im Detail aus?
Zitieren
#5
Ich nehme mal an, dass du sonst am USB nicht viel angeschlossen hast oder?

Erkannt wird ein USB to Serial Interface, das dürfte vermutlich deine GPS-Maus sein.
[ 2.283969] usb 1-1.1.2: New USB device found, idVendor=067b, idProduct=2303
[ 3.302008] usb 1-1.1.2: pl2303 converter now attached to ttyUSB0

Eingehängt wird das Teil in "/dev/ttyUSB0", das musst du auch in der GPSD Konfiguration setzen.

In der Datei /etc/default/gpsd gibt es den Eintrag DEVICES="XXX" und das muss auf DEVICES="/dev/ttyUSB0" gesetzt sein. Natürlich muss der Dienst anschließend neu gestartet werden.
Zitieren
#6
Ok, es war mein Fehler. Bin mit dem Ding jetzt mal direkt unter den freien Himmel gegangen da geht er. Tut mir leid Leute Sad
Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste
RasPiCarProjekt