Login

***cbrauweiler*** · 14.03.2016, 07:18

Probier das mal aus http://raspicarprojekt.de/showthread.php...23#pid2423

TommyC4 · 14.03.2016, 16:14

Danke.
Ich probiere das neue Image, aber ich muss erst ne neue SD Karte bestellen. Das ist ja doppelt so groß....

***cbrauweiler*** · 14.03.2016, 19:54

Kannste auch mit dem alten ausprobieren. Ist ja nur ne andere Touch-Config

TommyC4 · (Dieser Beitrag wurde zuletzt bearbeitet: 16.03.2016, 20:36 von TommyC4.)

Ich hab es ausprobiert, hat aber nichts geändert.
Hab auch mal einen Encoder angeschlossen, aber auch da keine Reaktion.

Auch das neue Image ändert nichts. Nur, dass ich jetzt noch nichtmal den Mauszeiger mehr sehe. Klicken mit der Maus geht auch nicht. Pfeiltasten auch nicht.

Hier mal meine Änderungen an der config.txt:
disable_overscan=1
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt=800 480 60 6 0 0 0
max_usb_current=1

Das übertakten habe ich erst mal wieder auskommentiert.
Wo kann ich anfangen den Fehler zu suchen?

Ich habe auch mal ein normales wheezy probiert, den Touchdriver nach Anleitung des Displayverkäufer installiert, aber dann kommt nach dem start nur ein schwarzes Bild mit nem blinkenden curser. Vor der Treiberinstallation alles normal.

Das nervt.... Sad

Ich hab an nem anderen Raspi B+ ein 19" touchmonitor, der hat auf Anhieb ohne jegliche Treiber und Calibration funktioniert. Warum geht das mit den kleinen nicht?

***cbrauweiler*** · 16.03.2016, 20:44

Mauszeiger fehlt mit absicht. Unter "/home/pi/.kodi/addons/skin.CarPC-touch_carbon_CB/16x9" gibt es eine Datei "_Pointer.xml". Mach den Unterstrich weg und dann reboot. Dann ist der Mauszeiger da.
Klick mit Mauszeiger geht sowieso nicht. Mit Maus kannst du navigieren und wenn du über einem Button bist kannst du mit "Enter" auf der Tastatur den Klick ausführen.

Warum dein Monitor nicht geht weiß ich nicht, aber den Blödsinn in der config.txt kannste getrost löschen.

TommyC4 · 16.03.2016, 20:50

Ohne die änderungen in der config.txt zeigt der nur komische linien an.
Hatte die änderungen irgendwo im netz gefunden und dann hat es funktioniert.
Wegen welchem der Einträge weiß ich allerdings nicht.
Dann versuche ich noch mal das jungfräuliche Image 2016....
:/
Kann ich irgendwo sehen, ob der touchcontroller erkannt wurde?

Aucass · 16.03.2016, 20:55

Also wenn bei mir was nicht funktioniert ist der erste Schritt --> dmesg
Wenn dort was dazu steht, hast du ja schon fast die Lösung Big Grin

Touchpanel wird erkannt? --> lsusb
Modul ist geladen? --> lsmod

Welches Image nutzt du jetzt? 2015 oder 2016?
Wenn beim 2016 die Encoder nicht gehen, das liegt dadran, dass sie in der gpio_description auskommentiert sind. Ob das auch bei der 2015er Version der fall ist, keine Ahnung!

TommyC4 · (Dieser Beitrag wurde zuletzt bearbeitet: 17.03.2016, 16:10 von TommyC4.)

Image 2016:
Also ich hab das mit der config.txt noch mal Schritt für Schritt getestet.
Erst wenn ich den hdmi_mode=87 setze, bekomme ich was auf dem Display angezeigt.

Code:
root@CarPi:~# lsusb

Bus 001 Device 004: ID 0eef:0005 D-WAV Scientific Co., Ltd

Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter

Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@CarPi:~# lsmod

Module                  Size  Used by

cfg80211              389253  0

rfkill                 16036  1 cfg80211

bcm2835_gpiomem         2860  0

bcm2835_rng             1763  0

uio_pdrv_genirq         2944  0

uio                     7753  1 uio_pdrv_genirq

i2c_bcm2708             4920  0

i2c_dev                 5671  0

snd_bcm2835            19802  5

snd_pcm                73442  1 snd_bcm2835

snd_timer              18792  1 snd_pcm

snd                    50779  13 snd_bcm2835,snd_timer,snd_pcm

fuse                   80694  3

ipv6                  338574  64

root@CarPi:~#

root@CarPi:~# dmesg

[    0.000000] Booting Linux on physical CPU 0xf00

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 4.1.18-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #846 SMP Thu Feb 25 14:22:53 GMT 2016

[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1

[    0.000000] cma: Reserved 8 MiB at 0x3a400000

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] On node 0 totalpages: 241664

[    0.000000] free_area_init_node: node 0, pgdat 80876f80, node_mem_map b9bb4000

[    0.000000]   Normal zone: 2124 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 241664 pages, LIFO batch:31

[    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)

[    0.000000] [bcm2709_smp_init_cpus] ncores=4

[    0.000000] PERCPU: Embedded 12 pages/cpu @bafb1000 s20416 r8192 d20544 u49152

[    0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa01041 bcm2709.serial=0x3551a7b7 smsc95xx.macaddr=B8:27:EB:51:A7:B7 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait loglevel=3 vt.global_cursor_default=0

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 939420K/966656K available (6024K kernel code, 534K rwdata, 1660K rodata, 448K init, 757K bss, 19044K reserved, 8192K cma-reserved)

[    0.000000] Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

    vmalloc : 0xbb800000 - 0xff000000   (1080 MB)

    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)

    modules : 0x7f000000 - 0x80000000   (  16 MB)

      .text : 0x80008000 - 0x807895a0   (7686 kB)

      .init : 0x8078a000 - 0x807fa000   ( 448 kB)

      .data : 0x807fa000 - 0x8087fac0   ( 535 kB)

       .bss : 0x80882000 - 0x8093f79c   ( 758 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Additional per-CPU info printed with stalls.

[    0.000000] NR_IRQS:608

[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).

[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[    0.000032] Switching to timer-based delay loop, resolution 52ns

[    0.000318] Console: colour dummy device 80x30

[    0.000551] console [tty1] enabled

[    0.000588] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

[    0.000611] pid_max: default: 32768 minimum: 301

[    0.000973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000994] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.002263] Initializing cgroup subsys blkio

[    0.002302] Initializing cgroup subsys memory

[    0.002336] Initializing cgroup subsys devices

[    0.002362] Initializing cgroup subsys freezer

[    0.002401] Initializing cgroup subsys net_cls

[    0.002472] CPU: Testing write buffer coherency: ok

[    0.002557] ftrace: allocating 20309 entries in 60 pages

[    0.051570] CPU0: update cpu_capacity 1024

[    0.051608] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00

[    0.051624] [bcm2709_smp_prepare_cpus] enter

[    0.051759] Setting up static identity map for 0x8240 - 0x8274

[    0.054219] [bcm2709_boot_secondary] cpu:1 started (0) 17

[    0.054660] [bcm2709_secondary_init] enter cpu:1

[    0.054722] CPU1: update cpu_capacity 1024

[    0.054731] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01

[    0.055298] [bcm2709_boot_secondary] cpu:2 started (0) 18

[    0.055655] [bcm2709_secondary_init] enter cpu:2

[    0.055688] CPU2: update cpu_capacity 1024

[    0.055696] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02

[    0.056232] [bcm2709_boot_secondary] cpu:3 started (0) 18

[    0.056487] [bcm2709_secondary_init] enter cpu:3

[    0.056515] CPU3: update cpu_capacity 1024

[    0.056523] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03

[    0.056614] Brought up 4 CPUs

[    0.056643] SMP: Total of 4 processors activated (153.60 BogoMIPS).

[    0.056653] CPU: All CPU(s) started in HYP mode.

[    0.056662] CPU: Virtualization extensions available.

[    0.057672] devtmpfs: initialized

[    0.081043] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5

[    0.081338] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.082471] pinctrl core: initialized pinctrl subsystem

[    0.083246] NET: Registered protocol family 16

[    0.088900] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.090032] bcm2709.uart_clock = 3000000

[    0.095301] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.095319] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.095516] Serial: AMBA PL011 UART driver

[    0.095702] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2

[    0.096260] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

[    0.172805] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35

[    0.172849] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)

[    0.173563] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver

[    0.173581] bcm2708-dmaengine 3f007000.dma: dma_debug:0

[    0.174299] SCSI subsystem initialized

[    0.174533] usbcore: registered new interface driver usbfs

[    0.174650] usbcore: registered new interface driver hub

[    0.174800] usbcore: registered new device driver usb

[    0.175504] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-02-25 14:25

[    0.202825] Switched to clocksource arch_sys_counter

[    0.251510] FS-Cache: Loaded

[    0.251901] CacheFiles: Loaded

[    0.264823] NET: Registered protocol family 2

[    0.266187] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.266331] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.266524] TCP: Hash tables configured (established 8192 bind 8192)

[    0.266649] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.266713] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.267189] NET: Registered protocol family 1

[    0.267653] RPC: Registered named UNIX socket transport module.

[    0.267670] RPC: Registered udp transport module.

[    0.267681] RPC: Registered tcp transport module.

[    0.267691] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.268776] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available

[    0.270168] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.286439] VFS: Disk quotas dquot_6.6.0

[    0.286823] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.289278] FS-Cache: Netfs 'nfs' registered for caching

[    0.290465] NFS: Registering the id_resolver key type

[    0.290534] Key type id_resolver registered

[    0.290546] Key type id_legacy registered

[    0.293388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    0.293577] io scheduler noop registered

[    0.293602] io scheduler deadline registered (default)

[    0.293931] io scheduler cfq registered

[    0.296517] BCM2708FB: allocated DMA memory fa800000

[    0.296559] BCM2708FB: allocated DMA channel 0 @ f3007000

[    0.303962] Console: switching to colour frame buffer device 100x30

[    0.308563] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled

[    0.309804] vc-cma: Videocore CMA driver

[    0.309820] vc-cma: vc_cma_base      = 0x00000000

[    0.309832] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)

[    0.309842] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)

[    0.310065] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)

[    0.325950] brd: module loaded

[    0.334834] loop: module loaded

[    0.335841] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0

[    0.337624] Loading iSCSI transport class v2.0-870.

[    0.338532] usbcore: registered new interface driver smsc95xx

[    0.338606] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    0.538992] Core Release: 2.80a

[    0.539014] Setting default values for core params

[    0.539059] Finished setting default values for core params

[    0.739485] Using Buffer DMA mode

[    0.739501] Periodic Transfer Interrupt Enhancement - disabled

[    0.739511] Multiprocessor Interrupt Enhancement - disabled

[    0.739523] OTG VER PARAM: 0, OTG VER FLAG: 0

[    0.739550] Dedicated Tx FIFOs mode

[    0.739928] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024

[    0.739968] FIQ FSM acceleration enabled for :

Non-periodic Split Transactions

Periodic Split Transactions

High-Speed Isochronous Endpoints

[    0.739992] dwc_otg: Microframe scheduler enabled

[    0.740060] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8040ecc0

[    0.740079] WARN::hcd_init_fiq:413: FIQ ASM at 0x8040f030 length 36

[    0.740098] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000

[    0.740144] dwc_otg 3f980000.usb: DWC OTG Controller

[    0.740194] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[    0.740238] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000

[    0.740293] Init: Port Power? op_state=1

[    0.740304] Init: Power Port (0)

[    0.740584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.740604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.740619] usb usb1: Product: DWC OTG Controller

[    0.740635] usb usb1: Manufacturer: Linux 4.1.18-v7+ dwc_otg_hcd

[    0.740649] usb usb1: SerialNumber: 3f980000.usb

[    0.741596] hub 1-0:1.0: USB hub found

[    0.741659] hub 1-0:1.0: 1 port detected

[    0.742138] dwc_otg: FIQ enabled

[    0.742152] dwc_otg: NAK holdoff enabled

[    0.742162] dwc_otg: FIQ split-transaction FSM enabled

[    0.742204] Module dwc_common_port init

[    0.742598] usbcore: registered new interface driver usb-storage

[    0.742916] mousedev: PS/2 mouse device common for all mice

[    0.743741] bcm2835-cpufreq: min=600000 max=900000

[    0.744083] sdhci: Secure Digital Host Controller Interface driver

[    0.744095] sdhci: Copyright(c) Pierre Ossman

[    0.744449] sdhost: log_buf @ ba813000 (fa813000)

[    0.822872] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[    0.843475] sdhci-pltfm: SDHCI platform and OF driver helper

[    0.844066] ledtrig-cpu: registered to indicate activity on CPUs

[    0.844297] hidraw: raw HID events driver (C) Jiri Kosina

[    0.844550] usbcore: registered new interface driver usbhid

[    0.844561] usbhid: USB HID core driver

[    0.845011] Initializing XFRM netlink socket

[    0.845065] NET: Registered protocol family 17

[    0.845235] Key type dns_resolver registered

[    0.845678] Registering SWP/SWPB emulation handler

[    0.846601] registered taskstats version 1

[    0.846862] vc-sm: Videocore shared memory driver

[    0.846884] [vc_sm_connected_init]: start

[    0.847633] [vc_sm_connected_init]: end - returning 0

[    0.849235] Waiting for root device /dev/mmcblk0p2...

[    0.880197] mmc0: host does not support reading read-only switch, assuming write-enable

[    0.882130] mmc0: new high speed SDHC card at address 0001

[    0.882732] mmcblk0: mmc0:0001 SD16G 14.6 GiB

[    0.884519]  mmcblk0: p1 p2

[    0.953322] Indeed it is in host mode hprt0 = 00021501

[    0.965767] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    0.965831] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

[    0.967077] devtmpfs: mounted

[    0.967810] Freeing unused kernel memory: 448K (8078a000 - 807fa000)

[    1.132894] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.133089] Indeed it is in host mode hprt0 = 00001101

[    1.333298] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[    1.333328] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.334221] hub 1-1:1.0: USB hub found

[    1.334356] hub 1-1:1.0: 5 ports detected

[    1.353363] random: systemd urandom read with 38 bits of entropy available

[    1.358408] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

[    1.358955] systemd[1]: Detected architecture 'arm'.

[    1.480985] NET: Registered protocol family 10

[    1.483036] systemd[1]: Inserted module 'ipv6'

[    1.487201] systemd[1]: Set hostname to <CarPi>.

[    1.612897] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    1.713282] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    1.713311] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.716203] smsc95xx v1.0.4

[    1.777329] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:a7:b7

[    1.852903] usb 1-1.4: new full-speed USB device number 4 using dwc_otg

[    1.943575] systemd-sysv-generator[68]: Overwriting existing symlink /run/systemd/generator.late/shairport.service with real service

[    1.956433] usb 1-1.4: New USB device found, idVendor=0eef, idProduct=0005

[    1.956462] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    1.956478] usb 1-1.4: Product: By ZH851

[    1.956498] usb 1-1.4: Manufacturer: RPI_TOUCH

[    1.956518] usb 1-1.4: SerialNumber: Wÿop\xffffffc2\xffffff89SH4&g

[    1.961595] hid-generic 0003:0EEF:0005.0001: hiddev0,hidraw0: USB HID v1.10 Device [RPI_TOUCH By ZH851] on usb-3f980000.usb-1.4/input0

[    2.243944] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[    2.244478] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    2.244608] systemd[1]: Starting Remote File Systems (Pre).

[    2.245320] systemd[1]: Reached target Remote File Systems (Pre).

[    2.245475] systemd[1]: Starting Encrypted Volumes.

[    2.245902] systemd[1]: Reached target Encrypted Volumes.

[    2.246095] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[    2.247130] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[    2.247256] systemd[1]: Starting Swap.

[    2.247628] systemd[1]: Reached target Swap.

[    2.247733] systemd[1]: Expecting device dev-mmcblk0p1.device...

[    2.248102] systemd[1]: Starting Root Slice.

[    2.248579] systemd[1]: Created slice Root Slice.

[    2.248682] systemd[1]: Starting User and Session Slice.

[    2.249318] systemd[1]: Created slice User and Session Slice.

[    2.249424] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[    2.250042] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[    2.250146] systemd[1]: Starting Delayed Shutdown Socket.

[    2.250678] systemd[1]: Listening on Delayed Shutdown Socket.

[    2.250782] systemd[1]: Starting Journal Socket (/dev/log).

[    2.251348] systemd[1]: Listening on Journal Socket (/dev/log).

[    2.251484] systemd[1]: Starting udev Control Socket.

[    2.251995] systemd[1]: Listening on udev Control Socket.

[    2.252120] systemd[1]: Starting udev Kernel Socket.

[    2.252589] systemd[1]: Listening on udev Kernel Socket.

[    2.252721] systemd[1]: Starting Journal Socket.

[    2.253403] systemd[1]: Listening on Journal Socket.

[    2.253597] systemd[1]: Starting System Slice.

[    2.254233] systemd[1]: Created slice System Slice.

[    2.254416] systemd[1]: Starting File System Check on Root Device...

[    2.258126] systemd[1]: Starting system-systemd\x2dfsck.slice.

[    2.259437] systemd[1]: Created slice system-systemd\x2dfsck.slice.

[    2.259656] systemd[1]: Starting system-autologin.slice.

[    2.260525] systemd[1]: Created slice system-autologin.slice.

[    2.260783] systemd[1]: Starting Increase datagram queue length...

[    2.265160] systemd[1]: Starting Restore / save the current clock...

[    2.277155] systemd[1]: Starting Create list of required static device nodes for the current kernel...

[    2.285848] systemd[1]: Mounting POSIX Message Queue File System...

[    2.356599] systemd[1]: Starting Load Kernel Modules...

[    2.363809] systemd[1]: Starting udev Coldplug all Devices...

[    2.403553] systemd[1]: Started Set Up Additional Binary Formats.

[    2.403798] systemd[1]: Mounted Huge Pages File System.

[    2.404346] systemd[1]: Mounting Debug File System...

[    2.409998] systemd[1]: Starting LSB: Show custom splashscreen...

[    2.416823] systemd[1]: Starting Slices.

[    2.420987] systemd[1]: Reached target Slices.

[    2.432188] systemd[1]: Mounted POSIX Message Queue File System.

[    2.439619] systemd[1]: Mounted Debug File System.

[    2.443666] systemd[1]: Started Increase datagram queue length.

[    2.454395] fuse init (API version 7.23)

[    2.465361] systemd[1]: Started Create list of required static device nodes for the current kernel.

[    2.474872] systemd[1]: Started LSB: Show custom splashscreen.

[    2.522721] systemd[1]: Started Restore / save the current clock.

[    2.526915] systemd[1]: Time has been changed

[    2.565703] systemd[1]: Started udev Coldplug all Devices.

[    2.598017] i2c /dev entries driver

[    2.616083] systemd[1]: Started Load Kernel Modules.

[    2.645309] systemd[1]: Started File System Check on Root Device.

[    2.716268] systemd[1]: Mounting FUSE Control File System...

[    2.722448] systemd[1]: Mounting Configuration File System...

[    2.728601] systemd[1]: Starting Apply Kernel Variables...

[    2.736405] systemd[1]: Starting Create Static Device Nodes in /dev...

[    2.743649] systemd[1]: Starting Syslog Socket.

[    2.746822] systemd[1]: Listening on Syslog Socket.

[    2.747070] systemd[1]: Starting Journal Service...

[    2.756697] systemd[1]: Started Journal Service.

[    2.920341] systemd-udevd[116]: starting version 215

[    3.621101] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[    4.515252] bcm2835-rng 3f104000.rng: hwrng registered

[    4.556767] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[    4.674815] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[    4.675156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    4.706788] systemd-journald[112]: Received request to flush runtime journal from PID 1

[    5.853363] cfg80211: Calling CRDA to update world regulatory domain

[    6.248047] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1

[    6.255315] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[    6.966355] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:2134012k SSFS

[    8.756201] random: nonblocking pool is initialized

[    9.003016] cfg80211: Calling CRDA to update world regulatory domain

[   12.152980] cfg80211: Calling CRDA to update world regulatory domain

[   15.302977] cfg80211: Calling CRDA to update world regulatory domain

[   18.452997] cfg80211: Calling CRDA to update world regulatory domain

[   21.603076] cfg80211: Calling CRDA to update world regulatory domain

[   24.753034] cfg80211: Calling CRDA to update world regulatory domain

[   27.903035] cfg80211: Calling CRDA to update world regulatory domain

[   31.053362] cfg80211: Calling CRDA to update world regulatory domain

[   34.203083] cfg80211: Calling CRDA to update world regulatory domain

[   37.353154] cfg80211: Calling CRDA to update world regulatory domain

[   40.503109] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

Das hab ich jetzt mal gemacht, aber viel damit anfangen kann ich nicht, außer, dass der erste USB-Device(4) der Touchscreen ist.

Aucass · (Dieser Beitrag wurde zuletzt bearbeitet: 17.03.2016, 19:19 von Aucass.)

Sry mein Fehler.
Ich brauche den Output von dmesg, diret nachdem du den Touch per USB angeschlossen hast.
Also Touch raus, Touch rein -> dmesg

Schau dir das hier mal an:
https://github.com/saper-2/rpi-5inch-hdm...een-driver

Das ist für dein Display. Befolge die Readme und dann sollte es eigentlich gehen..

TommyC4 · (Dieser Beitrag wurde zuletzt bearbeitet: 18.03.2016, 14:25 von TommyC4.)

Danke für die Hilfe Rolleyes

Code:
[    0.000000] Booting Linux on physical CPU 0xf00

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 4.1.18-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #846 SMP Thu Feb 25 14:22:53 GMT 2016

[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1

[    0.000000] cma: Reserved 8 MiB at 0x3a400000

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] On node 0 totalpages: 241664

[    0.000000] free_area_init_node: node 0, pgdat 80876f80, node_mem_map b9bb4000

[    0.000000]   Normal zone: 2124 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 241664 pages, LIFO batch:31

[    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)

[    0.000000] [bcm2709_smp_init_cpus] ncores=4

[    0.000000] PERCPU: Embedded 12 pages/cpu @bafb1000 s20416 r8192 d20544 u49152

[    0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa01041 bcm2709.serial=0x3551a7b7 smsc95xx.macaddr=B8:27:EB:51:A7:B7 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait loglevel=3 vt.global_cursor_default=0

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 939420K/966656K available (6024K kernel code, 534K rwdata, 1660K rodata, 448K init, 757K bss, 19044K reserved, 8192K cma-reserved)

[    0.000000] Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

    vmalloc : 0xbb800000 - 0xff000000   (1080 MB)

    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)

    modules : 0x7f000000 - 0x80000000   (  16 MB)

      .text : 0x80008000 - 0x807895a0   (7686 kB)

      .init : 0x8078a000 - 0x807fa000   ( 448 kB)

      .data : 0x807fa000 - 0x8087fac0   ( 535 kB)

       .bss : 0x80882000 - 0x8093f79c   ( 758 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Additional per-CPU info printed with stalls.

[    0.000000] NR_IRQS:608

[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).

[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[    0.000032] Switching to timer-based delay loop, resolution 52ns

[    0.000318] Console: colour dummy device 80x30

[    0.000551] console [tty1] enabled

[    0.000588] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

[    0.000611] pid_max: default: 32768 minimum: 301

[    0.000973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000994] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.002263] Initializing cgroup subsys blkio

[    0.002302] Initializing cgroup subsys memory

[    0.002336] Initializing cgroup subsys devices

[    0.002362] Initializing cgroup subsys freezer

[    0.002401] Initializing cgroup subsys net_cls

[    0.002472] CPU: Testing write buffer coherency: ok

[    0.002557] ftrace: allocating 20309 entries in 60 pages

[    0.051570] CPU0: update cpu_capacity 1024

[    0.051608] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00

[    0.051624] [bcm2709_smp_prepare_cpus] enter

[    0.051759] Setting up static identity map for 0x8240 - 0x8274

[    0.054219] [bcm2709_boot_secondary] cpu:1 started (0) 17

[    0.054660] [bcm2709_secondary_init] enter cpu:1

[    0.054722] CPU1: update cpu_capacity 1024

[    0.054731] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01

[    0.055298] [bcm2709_boot_secondary] cpu:2 started (0) 18

[    0.055655] [bcm2709_secondary_init] enter cpu:2

[    0.055688] CPU2: update cpu_capacity 1024

[    0.055696] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02

[    0.056232] [bcm2709_boot_secondary] cpu:3 started (0) 18

[    0.056487] [bcm2709_secondary_init] enter cpu:3

[    0.056515] CPU3: update cpu_capacity 1024

[    0.056523] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03

[    0.056614] Brought up 4 CPUs

[    0.056643] SMP: Total of 4 processors activated (153.60 BogoMIPS).

[    0.056653] CPU: All CPU(s) started in HYP mode.

[    0.056662] CPU: Virtualization extensions available.

[    0.057672] devtmpfs: initialized

[    0.081043] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5

[    0.081338] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.082471] pinctrl core: initialized pinctrl subsystem

[    0.083246] NET: Registered protocol family 16

[    0.088900] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.090032] bcm2709.uart_clock = 3000000

[    0.095301] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.095319] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.095516] Serial: AMBA PL011 UART driver

[    0.095702] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2

[    0.096260] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

[    0.172805] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35

[    0.172849] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)

[    0.173563] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver

[    0.173581] bcm2708-dmaengine 3f007000.dma: dma_debug:0

[    0.174299] SCSI subsystem initialized

[    0.174533] usbcore: registered new interface driver usbfs

[    0.174650] usbcore: registered new interface driver hub

[    0.174800] usbcore: registered new device driver usb

[    0.175504] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-02-25 14:25

[    0.202825] Switched to clocksource arch_sys_counter

[    0.251510] FS-Cache: Loaded

[    0.251901] CacheFiles: Loaded

[    0.264823] NET: Registered protocol family 2

[    0.266187] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.266331] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.266524] TCP: Hash tables configured (established 8192 bind 8192)

[    0.266649] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.266713] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.267189] NET: Registered protocol family 1

[    0.267653] RPC: Registered named UNIX socket transport module.

[    0.267670] RPC: Registered udp transport module.

[    0.267681] RPC: Registered tcp transport module.

[    0.267691] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.268776] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available

[    0.270168] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.286439] VFS: Disk quotas dquot_6.6.0

[    0.286823] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.289278] FS-Cache: Netfs 'nfs' registered for caching

[    0.290465] NFS: Registering the id_resolver key type

[    0.290534] Key type id_resolver registered

[    0.290546] Key type id_legacy registered

[    0.293388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    0.293577] io scheduler noop registered

[    0.293602] io scheduler deadline registered (default)

[    0.293931] io scheduler cfq registered

[    0.296517] BCM2708FB: allocated DMA memory fa800000

[    0.296559] BCM2708FB: allocated DMA channel 0 @ f3007000

[    0.303962] Console: switching to colour frame buffer device 100x30

[    0.308563] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled

[    0.309804] vc-cma: Videocore CMA driver

[    0.309820] vc-cma: vc_cma_base      = 0x00000000

[    0.309832] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)

[    0.309842] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)

[    0.310065] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)

[    0.325950] brd: module loaded

[    0.334834] loop: module loaded

[    0.335841] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0

[    0.337624] Loading iSCSI transport class v2.0-870.

[    0.338532] usbcore: registered new interface driver smsc95xx

[    0.338606] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    0.538992] Core Release: 2.80a

[    0.539014] Setting default values for core params

[    0.539059] Finished setting default values for core params

[    0.739485] Using Buffer DMA mode

[    0.739501] Periodic Transfer Interrupt Enhancement - disabled

[    0.739511] Multiprocessor Interrupt Enhancement - disabled

[    0.739523] OTG VER PARAM: 0, OTG VER FLAG: 0

[    0.739550] Dedicated Tx FIFOs mode

[    0.739928] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024

[    0.739968] FIQ FSM acceleration enabled for :

Non-periodic Split Transactions

Periodic Split Transactions

High-Speed Isochronous Endpoints

[    0.739992] dwc_otg: Microframe scheduler enabled

[    0.740060] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x8040ecc0

[    0.740079] WARN::hcd_init_fiq:413: FIQ ASM at 0x8040f030 length 36

[    0.740098] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000

[    0.740144] dwc_otg 3f980000.usb: DWC OTG Controller

[    0.740194] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[    0.740238] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000

[    0.740293] Init: Port Power? op_state=1

[    0.740304] Init: Power Port (0)

[    0.740584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    0.740604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.740619] usb usb1: Product: DWC OTG Controller

[    0.740635] usb usb1: Manufacturer: Linux 4.1.18-v7+ dwc_otg_hcd

[    0.740649] usb usb1: SerialNumber: 3f980000.usb

[    0.741596] hub 1-0:1.0: USB hub found

[    0.741659] hub 1-0:1.0: 1 port detected

[    0.742138] dwc_otg: FIQ enabled

[    0.742152] dwc_otg: NAK holdoff enabled

[    0.742162] dwc_otg: FIQ split-transaction FSM enabled

[    0.742204] Module dwc_common_port init

[    0.742598] usbcore: registered new interface driver usb-storage

[    0.742916] mousedev: PS/2 mouse device common for all mice

[    0.743741] bcm2835-cpufreq: min=600000 max=900000

[    0.744083] sdhci: Secure Digital Host Controller Interface driver

[    0.744095] sdhci: Copyright(c) Pierre Ossman

[    0.744449] sdhost: log_buf @ ba813000 (fa813000)

[    0.822872] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[    0.843475] sdhci-pltfm: SDHCI platform and OF driver helper

[    0.844066] ledtrig-cpu: registered to indicate activity on CPUs

[    0.844297] hidraw: raw HID events driver (C) Jiri Kosina

[    0.844550] usbcore: registered new interface driver usbhid

[    0.844561] usbhid: USB HID core driver

[    0.845011] Initializing XFRM netlink socket

[    0.845065] NET: Registered protocol family 17

[    0.845235] Key type dns_resolver registered

[    0.845678] Registering SWP/SWPB emulation handler

[    0.846601] registered taskstats version 1

[    0.846862] vc-sm: Videocore shared memory driver

[    0.846884] [vc_sm_connected_init]: start

[    0.847633] [vc_sm_connected_init]: end - returning 0

[    0.849235] Waiting for root device /dev/mmcblk0p2...

[    0.880197] mmc0: host does not support reading read-only switch, assuming write-enable

[    0.882130] mmc0: new high speed SDHC card at address 0001

[    0.882732] mmcblk0: mmc0:0001 SD16G 14.6 GiB

[    0.884519]  mmcblk0: p1 p2

[    0.953322] Indeed it is in host mode hprt0 = 00021501

[    0.965767] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    0.965831] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

[    0.967077] devtmpfs: mounted

[    0.967810] Freeing unused kernel memory: 448K (8078a000 - 807fa000)

[    1.132894] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.133089] Indeed it is in host mode hprt0 = 00001101

[    1.333298] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[    1.333328] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.334221] hub 1-1:1.0: USB hub found

[    1.334356] hub 1-1:1.0: 5 ports detected

[    1.353363] random: systemd urandom read with 38 bits of entropy available

[    1.358408] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

[    1.358955] systemd[1]: Detected architecture 'arm'.

[    1.480985] NET: Registered protocol family 10

[    1.483036] systemd[1]: Inserted module 'ipv6'

[    1.487201] systemd[1]: Set hostname to <CarPi>.

[    1.612897] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    1.713282] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    1.713311] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.716203] smsc95xx v1.0.4

[    1.777329] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:a7:b7

[    1.852903] usb 1-1.4: new full-speed USB device number 4 using dwc_otg

[    1.943575] systemd-sysv-generator[68]: Overwriting existing symlink /run/systemd/generator.late/shairport.service with real service

[    1.956433] usb 1-1.4: New USB device found, idVendor=0eef, idProduct=0005

[    1.956462] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    1.956478] usb 1-1.4: Product: By ZH851

[    1.956498] usb 1-1.4: Manufacturer: RPI_TOUCH

[    1.956518] usb 1-1.4: SerialNumber: Wÿop\xffffffc2\xffffff89SH4&g

[    1.961595] hid-generic 0003:0EEF:0005.0001: hiddev0,hidraw0: USB HID v1.10 Device [RPI_TOUCH By ZH851] on usb-3f980000.usb-1.4/input0

[    2.243944] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[    2.244478] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    2.244608] systemd[1]: Starting Remote File Systems (Pre).

[    2.245320] systemd[1]: Reached target Remote File Systems (Pre).

[    2.245475] systemd[1]: Starting Encrypted Volumes.

[    2.245902] systemd[1]: Reached target Encrypted Volumes.

[    2.246095] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[    2.247130] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[    2.247256] systemd[1]: Starting Swap.

[    2.247628] systemd[1]: Reached target Swap.

[    2.247733] systemd[1]: Expecting device dev-mmcblk0p1.device...

[    2.248102] systemd[1]: Starting Root Slice.

[    2.248579] systemd[1]: Created slice Root Slice.

[    2.248682] systemd[1]: Starting User and Session Slice.

[    2.249318] systemd[1]: Created slice User and Session Slice.

[    2.249424] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[    2.250042] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[    2.250146] systemd[1]: Starting Delayed Shutdown Socket.

[    2.250678] systemd[1]: Listening on Delayed Shutdown Socket.

[    2.250782] systemd[1]: Starting Journal Socket (/dev/log).

[    2.251348] systemd[1]: Listening on Journal Socket (/dev/log).

[    2.251484] systemd[1]: Starting udev Control Socket.

[    2.251995] systemd[1]: Listening on udev Control Socket.

[    2.252120] systemd[1]: Starting udev Kernel Socket.

[    2.252589] systemd[1]: Listening on udev Kernel Socket.

[    2.252721] systemd[1]: Starting Journal Socket.

[    2.253403] systemd[1]: Listening on Journal Socket.

[    2.253597] systemd[1]: Starting System Slice.

[    2.254233] systemd[1]: Created slice System Slice.

[    2.254416] systemd[1]: Starting File System Check on Root Device...

[    2.258126] systemd[1]: Starting system-systemd\x2dfsck.slice.

[    2.259437] systemd[1]: Created slice system-systemd\x2dfsck.slice.

[    2.259656] systemd[1]: Starting system-autologin.slice.

[    2.260525] systemd[1]: Created slice system-autologin.slice.

[    2.260783] systemd[1]: Starting Increase datagram queue length...

[    2.265160] systemd[1]: Starting Restore / save the current clock...

[    2.277155] systemd[1]: Starting Create list of required static device nodes for the current kernel...

[    2.285848] systemd[1]: Mounting POSIX Message Queue File System...

[    2.356599] systemd[1]: Starting Load Kernel Modules...

[    2.363809] systemd[1]: Starting udev Coldplug all Devices...

[    2.403553] systemd[1]: Started Set Up Additional Binary Formats.

[    2.403798] systemd[1]: Mounted Huge Pages File System.

[    2.404346] systemd[1]: Mounting Debug File System...

[    2.409998] systemd[1]: Starting LSB: Show custom splashscreen...

[    2.416823] systemd[1]: Starting Slices.

[    2.420987] systemd[1]: Reached target Slices.

[    2.432188] systemd[1]: Mounted POSIX Message Queue File System.

[    2.439619] systemd[1]: Mounted Debug File System.

[    2.443666] systemd[1]: Started Increase datagram queue length.

[    2.454395] fuse init (API version 7.23)

[    2.465361] systemd[1]: Started Create list of required static device nodes for the current kernel.

[    2.474872] systemd[1]: Started LSB: Show custom splashscreen.

[    2.522721] systemd[1]: Started Restore / save the current clock.

[    2.526915] systemd[1]: Time has been changed

[    2.565703] systemd[1]: Started udev Coldplug all Devices.

[    2.598017] i2c /dev entries driver

[    2.616083] systemd[1]: Started Load Kernel Modules.

[    2.645309] systemd[1]: Started File System Check on Root Device.

[    2.716268] systemd[1]: Mounting FUSE Control File System...

[    2.722448] systemd[1]: Mounting Configuration File System...

[    2.728601] systemd[1]: Starting Apply Kernel Variables...

[    2.736405] systemd[1]: Starting Create Static Device Nodes in /dev...

[    2.743649] systemd[1]: Starting Syslog Socket.

[    2.746822] systemd[1]: Listening on Syslog Socket.

[    2.747070] systemd[1]: Starting Journal Service...

[    2.756697] systemd[1]: Started Journal Service.

[    2.920341] systemd-udevd[116]: starting version 215

[    3.621101] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[    4.515252] bcm2835-rng 3f104000.rng: hwrng registered

[    4.556767] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[    4.674815] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[    4.675156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    4.706788] systemd-journald[112]: Received request to flush runtime journal from PID 1

[    5.853363] cfg80211: Calling CRDA to update world regulatory domain

[    6.248047] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1

[    6.255315] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[    6.966355] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:2134012k SSFS

[    8.756201] random: nonblocking pool is initialized

[    9.003016] cfg80211: Calling CRDA to update world regulatory domain

[   12.152980] cfg80211: Calling CRDA to update world regulatory domain

[   15.302977] cfg80211: Calling CRDA to update world regulatory domain

[   18.452997] cfg80211: Calling CRDA to update world regulatory domain

[   21.603076] cfg80211: Calling CRDA to update world regulatory domain

[   24.753034] cfg80211: Calling CRDA to update world regulatory domain

[   27.903035] cfg80211: Calling CRDA to update world regulatory domain

[   31.053362] cfg80211: Calling CRDA to update world regulatory domain

[   34.203083] cfg80211: Calling CRDA to update world regulatory domain

[   37.353154] cfg80211: Calling CRDA to update world regulatory domain

[   40.503109] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

[ 7869.975995] usb 1-1.4: USB disconnect, device number 4

[81529.947709] usb 1-1.4: new full-speed USB device number 5 using dwc_otg

[81530.051165] usb 1-1.4: New USB device found, idVendor=0eef, idProduct=0005

[81530.051198] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[81530.051214] usb 1-1.4: Product: By ZH851

[81530.051230] usb 1-1.4: Manufacturer: RPI_TOUCH

[81530.051245] usb 1-1.4: SerialNumber: Wÿop\xffffffc2\xffffff89SH4&g

[81530.056985] hid-generic 0003:0EEF:0005.0002: hiddev0,hidraw0: USB HID v1.10 Device [RPI_TOUCH By ZH851] on usb-3f980000.usb-1.4/input0

Ich vermute, die Zahlen sind die Zeit nach dem Boot.
Also hätten die letzten 7 Zeilen gereicht, oder? Smile

Login
Benutzername/E-Mail:
Passwort:	Passwort vergessen?
	Merken