+- RasPiCar Projekt Forum (https://RasPiCarProjekt.de)
+-- Forum: Hardware (https://RasPiCarProjekt.de/forumdisplay.php?fid=5)
+--- Forum: RaspberryPi (https://RasPiCarProjekt.de/forumdisplay.php?fid=41)
+--- Thema: Wiring question (/showthread.php?tid=1096)
Wiring question - Rsw - 23.07.2017
Hi all,
i don't know if this is the right section of the forum, so sorry if do a mistake.
My question is: what it means the two arrows (one in the right side of the pictures that comes on by RE1 3v3 and the other in the SV1 + 5v) in the picture below?
Picture: http://1.bp.blogspot.com/-SZac6sKbskw/VKlns7M4m_I/AAAAAAAAAjc/lAITH5E-Zmk/s1600/RPICarPC.png
Thankss
RE: Wiring question - Jack - 23.07.2017
You can ignore them. They just say: 'Here you can connect additional devices which need 3V3 or 5V'.
RE: Wiring question - Rsw - 24.07.2017
(23.07.2017, 18:01)Jack schrieb: You can ignore them. They just say: 'Here you can connect additional devices which need 3V3 or 5V'.
Hi Jack, thanks for the answer you solved my problem but i ask you the ultimate thing.
The two resistor 10K, are they good with every type of rotary encoder or there is a precise type of them?
Thankss
RE: Wiring question - Jack - 25.07.2017
There are some encoders that have a resistor built in. But most encoders don't have it. Look at the description/documentation of your encoders to find it out.
RE: Wiring question - Rsw - 26.07.2017
(25.07.2017, 07:34)Jack schrieb: There are some encoders that have a resistor built in. But most encoders don't have it. Look at the description/documentation of your encoders to find it out.
Thanks a lot!!!
